9scale Vacuum Products, Inc.
Return HomeRequest For QuoteLinksDirections

Return Home
Facilities
Request For Quote
Product Line

Furnaces and Ovens
Deposition Equipment
High Vacuum Equipment
Manifolding and Weldments
Ultra High Vacuum Equipment
Machining, Welding and Metal Finishing

E-mail Us
- General Business &
Office Inquiries


- Deposition & Complete
System Inquiries


- Component Inquiries

Product Line


9scale Vacuum Products, Inc.


9scale Vacuum Products, Inc.
192 Anawan Street Box 1B
Fall River, MA 02721
Tel: 800-565-6911 or 508-646-9352
Fax: 508-646-9597

 

High Vacuum Equipment

Dual Electron-Beam Evaporator

 

Dual Electron-Beam Evaporator. This system can be operated as a single/individual layer coater or as a dual/simultaneous coater. The system has a computer interface with which the operator can select stored recipes and change the parameters if necessary. All data from the run is stored on the hard drive for future evaluation utilizing a word processing program. The process can be run in auto and manual mode, with the option of the system paging an operator or technician if it is to be run in auto for extended periods of time. All safety interlocks are active during both modes of operation.



Vacuum Heat Treating Furnace

 

Vacuum Heat Treating Furnace system has an 8"x8"x20" hot zone that reaches temperatures of 3000 deg. F. It is also equipped with a rapid quench in inert gas system allowing it to cool parts at 30 deg. F per second. The base pressure is 1x10-7 Torr in thirty minutes utilizing a Varian 16" diffusion pump. multiple safety interlocks assist in preventing operator injury and process / component contamination. Fabrication of similar systems with larger or smaller hot zones is available to meet various requirements.



High Conductance LN2 Cold Trap

 

High Conductance LN2 Cold Trap is designed to allow as much throughput as possible while minimizing backstreaming. It's all stainless steel construction and optional automatic level control ensure top performance and longevity.



Poppet Valve

 

This Poppet Valve can be fabricated with or without water tracing. Sizes range from 6" diameter to 48" diameter. Bodies can be fabricated using Stainless Steel or Aluminum. The air operated cylinder allows a close on power failure option to protect against hi-vac pump dumping and process contamination.

Home | Facilities | Request For Quote | Links | Directions | Top of Page
Chambers | Furnaces & Ovens | Deposition Equipment | High Vacuum Equipment
Manifolding & Weldments | Ultra High Vacuum Equipment | Machining, Welding & Finishing

9scale Vacuum Products, Inc.
192 Anawan Street · Box 1B · Fall River, MA 02721
Tel: 800-565-6911 or 508-646-9352 · Fax: 508-646-9597